TY - JOUR
ID - 4545
TI - Forced convective heat transfer of non-Newtonian CMC-based CuO nanofluid in a tube
JO - Journal of Heat and Mass Transfer Research
JA - JHMTR
LA - en
SN - 2345-508X
AU - Bayareh, Morteza
AU - Afshar, Nader
AD - Department of Mechanical engineering, Shahrekord University
AD - Esfahan Oil Refinery Company, Isfahan
Y1 - 2020
PY - 2020
VL - 7
IS - 2
SP - 155
EP - 163
KW - Forced convective heat transfer
KW - Power-law non-Newtonian nanofluid
KW - Reynolds number
KW - Nusselt number
KW - Constant Heat Flux
DO - 10.22075/jhmtr.2020.19236.1262
N2 - In the present study, the thermal and rheological behavior of power-law non-Newtonian CMC-based CuO nanofluid in a tube is studied using ANSYS FLUENT software. Constant heat flux of 6000 W/m2 is subjected to the tube walls and the viscosity of nanofluid is assumed to be a function of shear rate, and temperature simultaneously. Two velocity profiles are considered as an inlet boundary condition: fully developed velocity and uniform velocity. Volume fractions of 0%-4%, and the Reynolds numbers of 600-1500 are considered in the simulations. For both velocity profiles, temperature and shear rate have considerable influence on the viscosity. Local heat transfer coefficient along the tube increases with the volume fraction, however, volume fractions less than 1.5% has an effect on local heat transfer slightly. It is revealed that as the Reynolds number enhances, local heat transfer and the average Nusselt number decrease. In conflict with previous investigations, the present results show that average Nusselt number is reduced by increasing the volume fraction of nanoparticles.
UR - https://jhmtr.semnan.ac.ir/article_4545.html
L1 - https://jhmtr.semnan.ac.ir/article_4545_aaa9653ae0ffccd976b4c32835d5470f.pdf
ER -