Author Index

A

  • Abbasi, Milad Thermodynamic Properties of Monatomic, Diatomic, and Polyatomic Gaseous Natural Refrigerants: A Molecular Dynamics Simulation [Volume 8, Issue 1, 2021, Pages 61-69]
  • Abbasian Arani, Ali Akbar Effect of baffle oientation on shell tube heat exchanger performance [Volume 4, Issue 2, 2017, Pages 83-90]
  • Abbaszade, Abbas Natural Convection Heat Transfer of Ag-MgO/Water Micropolar Hybrid Nanofluid inside an F-shaped Cavity Equipped by Hot Obstacle [Volume 8, Issue 2, 2021, Pages 139-150]
  • Abbaszadeh, Mahmoud Flow field and heat transfer in a channel with a permeable wall filled with Al2O3-Cu/water micropolar hybrid nanofluid, effects of chemical reaction and magnetic field [Volume 3, Issue 2, 2016, Pages 101-114]
  • Abolfazli Esfahani, Javad A novel electrokinetic micromixing system with conductive mixing-enclosure-A geometrical study [Volume 9, Issue 1, 2022, Pages 65-76]
  • Abolhasani, Mahdieh Intensification of CO₂ Capture by Monoethanolamine Solution in a Rotating Packed Bed Reactor Equipped with High Frequency Ultrasonic Transducers [Volume 9, Issue 2, 2022, Pages 121-128]
  • Afshar, Nader Forced convective heat transfer of non-Newtonian CMC-based CuO nanofluid in a tube [Volume 7, Issue 2, 2020, Pages 155-163]
  • Aghanajafi, Cyrus Analysis of Radiation Heat Transfer of a Micropolar Fluid with Variable Properties over a Stretching Sheet in the Presence of Magnetic Field [Volume 3, Issue 1, 2016, Pages 9-19]
  • Aghdasi, M. Simultaneous Separation/Trapping and Dual Trapping of Microparticles in a Novel Microchip using Dielectrophoresis [Volume 8, Issue 2, 2021, Pages 301-311]
  • Ahmadi, Behzad Thermo-Economic Analysis of Applying Cooling System Using Fog on GE-F5 Gas Turbines (Case Study) [Volume 4, Issue 2, 2017, Pages 73-81]
  • Ahmadi, Goodarz Modeling the Transient Absorption of Particulate Drugs in the Human Upper Airways [Volume 7, Issue 2, 2020, Pages 177-191]
  • Ahmadi Nadooshan, Afshin Experimental Investigation of the Alumina/Paraffin Thermal Conductivity Nanofluids with a New Correlated Equation on Effective Thermal Conductivity [Volume 6, Issue 2, 2019, Pages 85-93]
  • Ahmadi Nadooshan, Afshin Rapid mixing of Newtonian and non-Newtonian fluids in a three-dimensional micro-mixer using non-uniform magnetic field [Volume 6, Issue 1, 2019, Pages 55-61]
  • Ajibade, Abiodun Effect of Viscous Dissipation on Seady Natural Convection Heat and Mass Transfer in a Vertical Channel with Variable Viscosity and Thermal Conductivity [Volume 7, Issue 2, 2020, Pages 105-116]
  • Akbari, Kiavash Monte Carlo Optimization of a Solar Combisystem Using Photovoltaic-Thermal Systems in Hot and Dry Climatic Condition [Volume 9, Issue 2, 2022, Pages 233-244]
  • Akbari Kangarluei, Rostam Heat and Mass Transfer in Industrial Biscuit Baking Oven and Effect of Temperature on Baking Time [Volume 2, Issue 2, 2015, Pages 79-90]
  • Ali, Akram Slip flow of an optically thin radiating non-Gray couple stress fluid past a stretching sheet [Volume 3, Issue 1, 2016, Pages 21-30]
  • Aly, Abdelraheem Radiation and Chemical Reaction Effects on Unsteady Coupled Heat and Mass Transfer by Free Convection from a Vertical Plate Embedded in Porous Media [Volume 7, Issue 2, 2020, Pages 95-103]
  • Amin, Zahra Disinfection process with solar drying system [Volume 8, Issue 1, 2021, Pages 23-28]
  • Amin, Zeinab Disinfection process with solar drying system [Volume 8, Issue 1, 2021, Pages 23-28]
  • Aminian, Mohammad Reza Numerical study of flow and heat transfer characteristics of CuO/H2O nanofluid within a mini tube [Volume 6, Issue 1, 2019, Pages 11-20]
  • Aminossadati, Saiied Mostafa Magnetohydrodynamic mixed convection effects on the removal process of fluid particles from an open cavity in a horizontal channel [Volume 1, Issue 2, 2014, Pages 67-74]
  • Aminy, Mohammad Thermo-Economic Analysis of Applying Cooling System Using Fog on GE-F5 Gas Turbines (Case Study) [Volume 4, Issue 2, 2017, Pages 73-81]
  • Arabi, Seyed Mehdi Thermo-Economic Analysis of Applying Cooling System Using Fog on GE-F5 Gas Turbines (Case Study) [Volume 4, Issue 2, 2017, Pages 73-81]
  • Arefmanesh, Ali Effect of baffle oientation on shell tube heat exchanger performance [Volume 4, Issue 2, 2017, Pages 83-90]
  • Armaghani, Taher The optimization of inlet and outlet port locations of a vented square cavity [Volume 1, Issue 1, 2014, Pages 35-45]
  • Arzani, Sarvenaz Chilled ceiling effects on the Indoor air quality in a room equipped with displacement ventilation system [Volume 8, Issue 2, 2021, Pages 225-241]
  • Assareh, Ehsanolah Thermal-Economic Optimization of Shell and Tube Heat Exchanger by using a new Multi-Objective optimization method [Volume 3, Issue 1, 2016, Pages 67-76]
  • Ataei, Morteza Heat Transfer under Double Turbulent Pulsating Jets Impinging on a Flat Surface [Volume 4, Issue 1, 2017, Pages 45-52]
  • Atashkari, Kazem The Numerical analysis of an anode-supported high temperature DIR-PSOFC operating conditions with considering the maximum allowable temperature difference [Volume 2, Issue 2, 2015, Pages 15-25]
  • Azhdari Heravi, Alireza Investigation of pore-scale random porous media using lattice boltzmann method [Volume 2, Issue 1, 2015, Pages 1-12]

B

  • Babatunde, Abiodun Joseph Hematocrit effects on Blood flow through an overlapping stenosed artery with permeable wall [Volume 8, Issue 1, 2021, Pages 39-47]
  • Babatunde, Abiodun Joseph Fluid Analysis of Double-Layered Blood Flow through a Tapered Overlapping Stenosed Artery with a Porous Wall [Volume 9, Issue 2, 2022, Pages 189-196]
  • Bachok, Norfifah Boundary layer flow beneath a uniform free stream permeable continuous moving surface in a nanofluid [Volume 1, Issue 1, 2014, Pages 55-65]
  • Bahoosh, Reza A numerical investigation of heat transfer and pressure drop in a novel cylindrical heat sink with helical minichannels [Volume 5, Issue 1, 2018, Pages 11-26]
  • Bahoosh, Reza Energy and Exergy Analysis of a Diesel Engine Running with Biodiesel Fuel [Volume 5, Issue 2, 2018, Pages 95-104]
  • Bahoosh, Reza GDL construction effects on distribution of reactants and electrical current density in PEMFC [Volume 6, Issue 2, 2019, Pages 105-116]
  • Bahoosh, Reza An axisymmetric Lattice Boltzmann Method Simulation of Forced Convection Heat Transfer for Water/Aluminum Oxide Nanofluid through a Tube under Constant Heat Flux on Wall [Volume 8, Issue 1, 2021, Pages 71-85]
  • Bahoosh, Reza The effect of nanoparticle shape on hydrothermal performance and entropy generation of boehmit alumina nanofluid in a cylindrical heat sink with helical minichannels [Volume 9, Issue 1, 2022, Pages 85-98]
  • Bahoosh, Reza Fabrication of solar desalination system and Experimental investigation on the performance of it, located in Ahvaz city [(Articles in Press)]
  • Bahrainian, Seyed Saied GDL construction effects on distribution of reactants and electrical current density in PEMFC [Volume 6, Issue 2, 2019, Pages 105-116]
  • Bahrami, Ali Processes and apparatuses for formation, separation, pelletizing storage and re-gasification of gas hydrate [Volume 2, Issue 2, 2015, Pages 27-35]
  • Bahreini, Mohammad Development of a phase change model for volume-of-fluid method in OpenFOAM [Volume 3, Issue 2, 2016, Pages 131-143]
  • Balamurugan, S. Investigation of shell and tube heat exchangers by using a design of experiment [Volume 1, Issue 2, 2014, Pages 59-66]
  • Baniamerian, Zahra Hydro-thermal performance evaluation of nanofluids flow in double pipe heat exchanger: Effects of inner pipe cross section, circular or cam-shaped [Volume 8, Issue 2, 2021, Pages 283-299]
  • Baniamerian, Zahra Multi Objective Optimization of Shell & Tube Heat Exchanger by Genetic, Particle Swarm and Jaya Optimization algorithms; Assessment of Nanofluids as the Coolant [Volume 9, Issue 1, 2022, Pages 1-16]
  • Barik, Ashok Kumar Fluid flow and heat transfer characteristics in a curved rectangular duct using Al2O3-water nanofluid [Volume 4, Issue 2, 2017, Pages 103-115]
  • Basirat Tabrizi, Hassan Effects of coupling on turbulent gas-particle boundary layer flows at borderline volume fractions using kinetic theory [Volume 1, Issue 1, 2014, Pages 1-8]
  • Bayareh, Morteza Mixed Convection Heat Transfer of Water-Alumina Nanofluid in an Inclined and Baffled C-Shaped Enclosure [Volume 5, Issue 2, 2018, Pages 129-138]
  • Bayareh, Morteza Rapid mixing of Newtonian and non-Newtonian fluids in a three-dimensional micro-mixer using non-uniform magnetic field [Volume 6, Issue 1, 2019, Pages 55-61]
  • Bayareh, Morteza Forced convective heat transfer of non-Newtonian CMC-based CuO nanofluid in a tube [Volume 7, Issue 2, 2020, Pages 155-163]
  • Bayat, Ali Inward melting inside a horizontal multilobed capsule with conductive wall affected by Ag-MgO/water hybrid and MgO/water nanofluids [Volume 8, Issue 2, 2021, Pages 205-223]
  • Bhandari, Prabhakar Computational Analysis of Automobile Radiator Roughened with Rib Roughness [Volume 9, Issue 2, 2022, Pages 209-218]
  • B. I, Olajuwon Stagnation-point flow of a Walters’ B fluid towards a vertical stretching surface embedded in a porous medium with elastic-deformation and chemical reaction [Volume 9, Issue 1, 2022, Pages 27-38]
  • Biglari, Mojtaba Numerical Study of Entropy Generation for Natural Convection in Cylindrical Cavities [Volume 3, Issue 2, 2016, Pages 89-99]
  • Biglari, Mojtaba Thermal-Economic Optimization of Shell and Tube Heat Exchanger by using a new Multi-Objective optimization method [Volume 3, Issue 1, 2016, Pages 67-76]
  • Biglari, Nazanin An Exact Analytical Solution for Gaseous Flow and Heat Transfer in Microtubes with Constant Wall Temperature [Volume 8, Issue 1, 2021, Pages 13-22]
  • Bisht, Vijay Singh Computational Analysis of Automobile Radiator Roughened with Rib Roughness [Volume 9, Issue 2, 2022, Pages 209-218]
  • B. J, Akinbo Stagnation-point flow of a Walters’ B fluid towards a vertical stretching surface embedded in a porous medium with elastic-deformation and chemical reaction [Volume 9, Issue 1, 2022, Pages 27-38]
  • Bozorgan, Navid Analysis of Gasketed-plate Heat Exchanger Performance Using Nanofluid [Volume 4, Issue 1, 2017, Pages 65-72]

C

  • Cabral, Elenilson Coupled Integral Equations Approach in the Solution of Luikov Equations with Microwave Effect [Volume 7, Issue 1, 2020, Pages 63-75]
  • Chamkha, A. J Radiation and Chemical Reaction Effects on Unsteady Coupled Heat and Mass Transfer by Free Convection from a Vertical Plate Embedded in Porous Media [Volume 7, Issue 2, 2020, Pages 95-103]
  • Chamkha, Ali Unsteady free convection flow between two vertical plates with variable temperature and mass diffusion [Volume 2, Issue 1, 2015, Pages 49-58]

D

  • Dada, Moses S. Hematocrit effects on Blood flow through an overlapping stenosed artery with permeable wall [Volume 8, Issue 1, 2021, Pages 39-47]
  • Dada, Moses S. Fluid Analysis of Double-Layered Blood Flow through a Tapered Overlapping Stenosed Artery with a Porous Wall [Volume 9, Issue 2, 2022, Pages 189-196]
  • Dadkhah, Mostafa The Numerical analysis of an anode-supported high temperature DIR-PSOFC operating conditions with considering the maximum allowable temperature difference [Volume 2, Issue 2, 2015, Pages 15-25]
  • Darand, Jamal Investigation of particle resuspension from a garment using different turbulence dispersion models [Volume 9, Issue 2, 2022, Pages 141-154]
  • Das, Sanatan Unsteady free convection flow between two vertical plates with variable temperature and mass diffusion [Volume 2, Issue 1, 2015, Pages 49-58]
  • Das, Sanatan Entropy generation in hydromagnetic and thermal boundary layer flow due to radial stretching sheet with Newtonian heating [Volume 2, Issue 2, 2015, Pages 51-61]
  • Das, Sanatan Slip flow of an optically thin radiating non-Gray couple stress fluid past a stretching sheet [Volume 3, Issue 1, 2016, Pages 21-30]
  • Davoodi, Mahdi An Exact Analytical Solution for Gaseous Flow and Heat Transfer in Microtubes with Constant Wall Temperature [Volume 8, Issue 1, 2021, Pages 13-22]
  • Dehghan, Maziar Effects of coupling on turbulent gas-particle boundary layer flows at borderline volume fractions using kinetic theory [Volume 1, Issue 1, 2014, Pages 1-8]
  • Dehghan, Maziar An experimental investigation of rheological characteristics of non- Newtonian nanofluids [Volume 1, Issue 1, 2014, Pages 17-23]
  • Dehghan, Maziar Analysis of variance of nanofluid heat transfer data for forced convection in horizontal spirally coiled tubes [Volume 2, Issue 2, 2015, Pages 45-50]
  • Dehghan, Maziar Converging Flow Passages, Nanofluids and Magnetic Field: Effects on the Thermal Response of Microchannel Heat Sinks [Volume 9, Issue 1, 2022, Pages 77-84]
  • Delbari, Omid Heat Transfer Correlation for Two Phase Flow in a Mixing Tank [Volume 7, Issue 1, 2020, Pages 1-10]
  • Dibaei, Mohammadhosein New Achievements in Fe3O4 Nanofluid Fully Developed Forced Convection Heat Transfer under the Effect of a Magnetic Field: An Experimental Study [Volume 4, Issue 1, 2017, Pages 1-11]
  • Domeyri Ganji, Davoud Wall thermal inertia effects of pulsatile flow in a ribbed tube: A numerical approach [Volume 7, Issue 1, 2020, Pages 85-94]

E

  • Eisazadeh, Hossein Removal of copper ions from aqueous solutions using polypyrrole and its nanocomposites [Volume 1, Issue 2, 2014, Pages 101-106]
  • Erfani, Amir Processes and apparatuses for formation, separation, pelletizing storage and re-gasification of gas hydrate [Volume 2, Issue 2, 2015, Pages 27-35]
  • Esmaeilinasab, ALI The effect of SiO2 nanoparticle on the performance of photovoltaic thermal system: Experimental and Theoretical approach [Volume 7, Issue 1, 2020, Pages 11-24]
  • Esmaili, Qadir Investigation of purge time in cathodic dead-end mode PEMFC [Volume 2, Issue 1, 2015, Pages 13-19]
  • Estumano, Diego Cardoso Estimation Of Parameters And Selection Of Models Applied To Population Balance Dynamics Via Approximate Bayesian Computational [Volume 9, Issue 1, 2022, Pages 53-64]
  • Estumano, Diego Cardoso Parameter Estimation in Mass Balance Model Applied in Fixed Bed Adsorption Using the Markov Chain Monte Carlo Method [Volume 9, Issue 2, 2022, Pages 219-232]
  • Etemadi, Armin The Numerical analysis of an anode-supported high temperature DIR-PSOFC operating conditions with considering the maximum allowable temperature difference [Volume 2, Issue 2, 2015, Pages 15-25]

F

  • Falahat, Alireza A numerical investigation of heat transfer and pressure drop in a novel cylindrical heat sink with helical minichannels [Volume 5, Issue 1, 2018, Pages 11-26]
  • Falahat, Alireza The effect of nanoparticle shape on hydrothermal performance and entropy generation of boehmit alumina nanofluid in a cylindrical heat sink with helical minichannels [Volume 9, Issue 1, 2022, Pages 85-98]
  • Falavand Jozaei, Ali Numerical simulation of transient natural gas flow in pipelines using high order DG-ADER scheme [Volume 4, Issue 1, 2017, Pages 35-43]
  • Falavand Jozaei, Ali The Effects of Operational Parameters on the Flow Characteristics in Annular Space During Under-Balanced Drilling Operations [Volume 8, Issue 1, 2021, Pages 127-138]
  • Farsani, Rouhollah Yadollahi Magnetohydrodynamic mixed convection effects on the removal process of fluid particles from an open cavity in a horizontal channel [Volume 1, Issue 2, 2014, Pages 67-74]
  • Farzaneh Gord, M The optimization of inlet and outlet port locations of a vented square cavity [Volume 1, Issue 1, 2014, Pages 35-45]
  • Fatehi, Rouhollah Numerical Investigation of Roofing Materials Effect on Solar Heat Gain in Different External Conditions [Volume 6, Issue 1, 2019, Pages 41-53]
  • Fattahi, Amir Converging Flow Passages, Nanofluids and Magnetic Field: Effects on the Thermal Response of Microchannel Heat Sinks [Volume 9, Issue 1, 2022, Pages 77-84]

G

  • G, Anitha Analytical and numerical investigation of heat and mass transfer effects on magnetohydrodynamic natural convective flow past a vertical porous plate [Volume 4, Issue 2, 2017, Pages 117-133]
  • G, Jithender Reddy Analytical and numerical investigation of heat and mass transfer effects on magnetohydrodynamic natural convective flow past a vertical porous plate [Volume 4, Issue 2, 2017, Pages 117-133]
  • Ganesh, N.Vishnu Analytical and Numerical Studies on Hydromagnetic Flow of Boungiorno Model Nanofluid over a Vertical Plate [Volume 3, Issue 2, 2016, Pages 153-164]
  • Ganga, B. Analytical and Numerical Studies on Hydromagnetic Flow of Boungiorno Model Nanofluid over a Vertical Plate [Volume 3, Issue 2, 2016, Pages 153-164]
  • Ganga, B. Influence of inclined Lorentz forces on entropy generation analysis for viscoelastic fluid over a stretching sheet with nonlinear thermal radiation and heat source/sink [Volume 6, Issue 1, 2019, Pages 1-10]
  • Ganga, B. Three-DimensionalViscousDissipative Flow of Nanofluids Over a Riga Plate [Volume 8, Issue 1, 2021, Pages 49-60]
  • Gbadeyan, Jacob Thermodynamic analysis of a magnetohydrodyamic oldroyd 8-constant fluid in a vertical channel with heat source and slippage [Volume 4, Issue 2, 2017, Pages 135-148]
  • Ghadamian, Hossein Thermo-Economic Analysis of Applying Cooling System Using Fog on GE-F5 Gas Turbines (Case Study) [Volume 4, Issue 2, 2017, Pages 73-81]
  • Ghaffarpasand, Omid Characterization of unsteady double-diffusive mixed convection flow with soret and dufour effects in a square enclosure with top moving lid [Volume 5, Issue 1, 2018, Pages 51-68]
  • Ghafouri, Ashkan Numerical simulation of transient natural gas flow in pipelines using high order DG-ADER scheme [Volume 4, Issue 1, 2017, Pages 35-43]
  • Ghalambaz, Mohammad Effect of magnetic field on the boundary layer flow, heat, and mass transfer of nanofluids over a stretching cylinder [Volume 1, Issue 1, 2014, Pages 9-16]
  • Ghasemi, Behzad Magnetohydrodynamic mixed convection effects on the removal process of fluid particles from an open cavity in a horizontal channel [Volume 1, Issue 2, 2014, Pages 67-74]
  • Ghazvehi, Mohammad Determining Effective Parameters on Hydrodynamic Characteristics of Pulsed Packed Column Using ANOVA Method: Determining Optimum Conditions with Maximum Extraction Efficiency [Volume 8, Issue 2, 2021, Pages 267-281]
  • Gheibi, A. Using the Lattice Boltzmann Method for the numerical study of non-fourier conduction with variable thermal conductivity [Volume 5, Issue 1, 2018, Pages 1-9]
  • Gheibi, A. Performance Investigation of Two Two-Stage Trans-Critical Carbon Dioxide Refrigeration Cycles Ejector and Internal Heat Exchanger [Volume 6, Issue 2, 2019, Pages 75-84]
  • Ghobadpouri, Saeed The Effects of Operational Parameters on the Flow Characteristics in Annular Space During Under-Balanced Drilling Operations [Volume 8, Issue 1, 2021, Pages 127-138]
  • Gholy Nejad, Puriya Mohamad Investigation on Turbulent Nanofluid Flow in Helical Tube in Tube Heat Exchangers [Volume 6, Issue 1, 2019, Pages 31-39]
  • Ghorbani, Saba The Numerical analysis of an anode-supported high temperature DIR-PSOFC operating conditions with considering the maximum allowable temperature difference [Volume 2, Issue 2, 2015, Pages 15-25]
  • Govindaraju, M. Influence of inclined Lorentz forces on entropy generation analysis for viscoelastic fluid over a stretching sheet with nonlinear thermal radiation and heat source/sink [Volume 6, Issue 1, 2019, Pages 1-10]
  • Guimarães, Paulo Mohallem Mixed convection study in a ventilated square cavity using nanofluids [Volume 6, Issue 2, 2019, Pages 143-153]

H

  • Haghighi Asl, Ali Numerical modelling of double-diffusive natural convection within an arc shaped enclosure filled with a porous medium [Volume 1, Issue 2, 2014, Pages 83-91]
  • Haghighi Asl, Ali Two-dimensional Simulation of Mass Transfer and Nano-Particle Deposition of Cigarette Smoke in a Human Airway [Volume 5, Issue 1, 2018, Pages 79-85]
  • Hajidavalloo, Ebrahim An experimental investigation of performance of a 3-D solar conical collector at different flow rates [Volume 3, Issue 1, 2016, Pages 57-66]
  • Hajimohammadi, Ali Heat Transfer under Double Turbulent Pulsating Jets Impinging on a Flat Surface [Volume 4, Issue 1, 2017, Pages 45-52]
  • Hakeem, A.K. Abdul Analytical and Numerical Studies on Hydromagnetic Flow of Boungiorno Model Nanofluid over a Vertical Plate [Volume 3, Issue 2, 2016, Pages 153-164]
  • Hakeem, A.K. Abdul Influence of inclined Lorentz forces on entropy generation analysis for viscoelastic fluid over a stretching sheet with nonlinear thermal radiation and heat source/sink [Volume 6, Issue 1, 2019, Pages 1-10]
  • Hakeem, A.K. Abdul Three-DimensionalViscousDissipative Flow of Nanofluids Over a Riga Plate [Volume 8, Issue 1, 2021, Pages 49-60]
  • Hamedi Estakhrsar, Mohammad Hadi Numerical simulation of turbulent compressible flows in a C-D nozzle with different divergence angles [Volume 1, Issue 2, 2014, Pages 93-100]
  • Hamzehei, Mahdi Investigating Tubes Material Selection on Thermal Stress in Shell Side Inlet Zone of a Vertical Shell and Tube Heat Exchanger [Volume 6, Issue 1, 2019, Pages 21-30]
  • Harmand, Souad A novel electrokinetic micromixing system with conductive mixing-enclosure-A geometrical study [Volume 9, Issue 1, 2022, Pages 65-76]
  • Hassanzadeh, Rahim Heat transfer enhancement in a spiral plate heat exchanger model using continuous rods [Volume 7, Issue 1, 2020, Pages 39-53]
  • Hefzi Lotfabadi, Mahdi Intensification of CO₂ Capture by Monoethanolamine Solution in a Rotating Packed Bed Reactor Equipped with High Frequency Ultrasonic Transducers [Volume 9, Issue 2, 2022, Pages 121-128]
  • Heidarian, Ali Effect of opening diffuser and return vent location on air quality, thermal comfort and energy saving in desk displacement ventilation (DDV) system [Volume 5, Issue 2, 2018, Pages 139-148]
  • Hemmat Esfe, Mohammad Experimental investigation and proposed correlations for temperaturedependent thermal conductivity enhancement of ethylene glycol based nanofluid containing ZnO nanoparticles [Volume 1, Issue 1, 2014, Pages 47-54]
  • Hemmat Esfe, Mohammad Buoyancy driven heat transfer of a nanofluid in a differentially heated square cavity under effect of an adiabatic square baffle [Volume 2, Issue 2, 2015, Pages 1-13]
  • Hemmat Esfe, Mohammad Numerical study of a combined convection flow in a cavity filled with nanofluid considering effects of diameter of nanoparticles and cavity inclination angles [Volume 5, Issue 1, 2018, Pages 39-49]
  • Heydari, Ali Numerical investigation of heat transfer in a sintered porous fin in a channel flow with the aim of material determination [Volume 6, Issue 1, 2019, Pages 63-74]
  • Hormozi, Faramarz Determination of stationary region boundary in multiple reference frames method in a mixing system agitated by Helical Ribbon Impeller using CFD [Volume 2, Issue 1, 2015, Pages 31-37]

I

  • Ismail, Fudziah Boundary layer flow beneath a uniform free stream permeable continuous moving surface in a nanofluid [Volume 1, Issue 1, 2014, Pages 55-65]
  • Izadpanahi, Ehsan Effect of magnetic field on the boundary layer flow, heat, and mass transfer of nanofluids over a stretching cylinder [Volume 1, Issue 1, 2014, Pages 9-16]

J

  • Jadidi, Amir Mohammad Effect of opening diffuser and return vent location on air quality, thermal comfort and energy saving in desk displacement ventilation (DDV) system [Volume 5, Issue 2, 2018, Pages 139-148]
  • Jadidi, Amir Mohammad Chilled ceiling effects on the Indoor air quality in a room equipped with displacement ventilation system [Volume 8, Issue 2, 2021, Pages 225-241]
  • Jafarian, Ali Investigation of particle resuspension from a garment using different turbulence dispersion models [Volume 9, Issue 2, 2022, Pages 141-154]
  • Jafarpur, Khosrow Numerical simulation of Laminar Free Convection Heat Transfer around Isothermal Concave and Convex Body Shapes [Volume 2, Issue 2, 2015, Pages 37-44]
  • Jahangiri, Ali Numerical Study of Spherical Vapor Layer Growth Due to Contact of a Hot Object and Water [Volume 5, Issue 2, 2018, Pages 111-120]
  • Jahangiri, Mansour Determination of stationary region boundary in multiple reference frames method in a mixing system agitated by Helical Ribbon Impeller using CFD [Volume 2, Issue 1, 2015, Pages 31-37]
  • Jahangiri, Mansour Heat Transfer Correlation for Two Phase Flow in a Mixing Tank [Volume 7, Issue 1, 2020, Pages 1-10]
  • Jahromi, Mehdi Numerical simulation of turbulent compressible flows in a C-D nozzle with different divergence angles [Volume 1, Issue 2, 2014, Pages 93-100]
  • Jalalizadeh, Mohammad Monte Carlo Optimization of a Solar Combisystem Using Photovoltaic-Thermal Systems in Hot and Dry Climatic Condition [Volume 9, Issue 2, 2022, Pages 233-244]
  • Jamir, Temjennaro Effects of Radiation Absorption, Soret and Dufour on Unsteady MHD Mixed Convective Flow past a Vertical Permeable Plate with Slip Condition and Viscous Dissipation [Volume 9, Issue 2, 2022, Pages 155-168]
  • Jana, Rabindera Nas Unsteady free convection flow between two vertical plates with variable temperature and mass diffusion [Volume 2, Issue 1, 2015, Pages 49-58]
  • Jana, Rabindra Nath Jana Slip flow of an optically thin radiating non-Gray couple stress fluid past a stretching sheet [Volume 3, Issue 1, 2016, Pages 21-30]
  • Jana, R.N. Entropy generation in hydromagnetic and thermal boundary layer flow due to radial stretching sheet with Newtonian heating [Volume 2, Issue 2, 2015, Pages 51-61]
  • Jayhooni, Sayed Mohammad Hashem Numerical simulation of Laminar Free Convection Heat Transfer around Isothermal Concave and Convex Body Shapes [Volume 2, Issue 2, 2015, Pages 37-44]
  • Jenifer, A. Sahaya Unsteady Magnetohydrodynamic Mixed Convection Flow over a Rotating Sphere with Sinusoidal Mass Transfer [Volume 9, Issue 2, 2022, Pages 129-140]
  • John, Omowaye Effects of Some Thermo-Physical Parameters on Free Convective Heat and Mass Transfer over Vertical Stretching Surface at Absolute Zero [Volume 3, Issue 1, 2016, Pages 31-46]
  • Jokari, Mohamad An axisymmetric Lattice Boltzmann Method Simulation of Forced Convection Heat Transfer for Water/Aluminum Oxide Nanofluid through a Tube under Constant Heat Flux on Wall [Volume 8, Issue 1, 2021, Pages 71-85]
  • Jourabian, Mahmoud Inward melting inside a horizontal multilobed capsule with conductive wall affected by Ag-MgO/water hybrid and MgO/water nanofluids [Volume 8, Issue 2, 2021, Pages 205-223]

K

  • Kamil Salihoglu, Nezih Disinfection process with solar drying system [Volume 8, Issue 1, 2021, Pages 23-28]
  • Karami, Maryam Transient simulation and life cycle cost analysis of a solar polygeneration system using photovoltaic-thermal collectors and hybrid desalination unit [Volume 8, Issue 2, 2021, Pages 243-256]
  • Karami, Maryam Monte Carlo Optimization of a Solar Combisystem Using Photovoltaic-Thermal Systems in Hot and Dry Climatic Condition [Volume 9, Issue 2, 2022, Pages 233-244]
  • Kardgar, Amin Wall thermal inertia effects of pulsatile flow in a ribbed tube: A numerical approach [Volume 7, Issue 1, 2020, Pages 85-94]
  • Kargarsharifabad, Hadi New Achievements in Fe3O4 Nanofluid Fully Developed Forced Convection Heat Transfer under the Effect of a Magnetic Field: An Experimental Study [Volume 4, Issue 1, 2017, Pages 1-11]
  • Kargarsharifabad, Hadi Developing a Model for Predicting the Outlet Gas Temperature of Natural Gas Pressure Reduction Stations to reduce Energy loss [Volume 7, Issue 2, 2020, Pages 143-154]
  • Kargarsharifabad, Hadi Numerical simulation of combined transient natural convection and volumetric radiation inside hollow bricks [Volume 8, Issue 2, 2021, Pages 151-162]
  • Karimi, Ali Multi Objective Optimization of Shell & Tube Heat Exchanger by Genetic, Particle Swarm and Jaya Optimization algorithms; Assessment of Nanofluids as the Coolant [Volume 9, Issue 1, 2022, Pages 1-16]
  • Kasaeipoor, Abbas Mixed Convection Heat Transfer of Water-Alumina Nanofluid in an Inclined and Baffled C-Shaped Enclosure [Volume 5, Issue 2, 2018, Pages 129-138]
  • Kayhani, MH A Comparative Solution of Natural Convection in an Open Cavity using Different Boundary Conditions via Lattice Boltzmann Method [Volume 3, Issue 2, 2016, Pages 115-129]
  • Kayhani, Mohammad Hasan Time Dependent Heat Source Estimation by Conjugate Gradient Method in Multi-Layers System for Hyperthermia of Breast cancer [Volume 7, Issue 2, 2020, Pages 117-129]
  • Kehinde, A. J. Analysis of heat transfer in the pyrolysis of differently shaped biomass particles subjected to different boundary conditions: integral transform methods [Volume 4, Issue 1, 2017, Pages 21-34]
  • Keimanesh, Reza Analysis of Radiation Heat Transfer of a Micropolar Fluid with Variable Properties over a Stretching Sheet in the Presence of Magnetic Field [Volume 3, Issue 1, 2016, Pages 9-19]
  • Keshav, Amit Separation of methacrylic acid from aqueous phase using quaternary amine [Volume 3, Issue 1, 2016, Pages 1-7]
  • Khajehpour, Ebrahim The effect of SiO2 nanoparticle on the performance of photovoltaic thermal system: Experimental and Theoretical approach [Volume 7, Issue 1, 2020, Pages 11-24]
  • Khalesi Doost, Abdolah Developing a Model for Predicting the Outlet Gas Temperature of Natural Gas Pressure Reduction Stations to reduce Energy loss [Volume 7, Issue 2, 2020, Pages 143-154]
  • Khalili, Reza An axisymmetric Lattice Boltzmann Method Simulation of Forced Convection Heat Transfer for Water/Aluminum Oxide Nanofluid through a Tube under Constant Heat Flux on Wall [Volume 8, Issue 1, 2021, Pages 71-85]
  • Khandan Bakavoli, Mohsen Computational fluid dynamics simulation of the flow patterns and performance of conventional and dual-cone gas-particle cyclones [Volume 5, Issue 1, 2018, Pages 27-38]
  • Kharinezhad Arani, Hamidreza Investigation of particle resuspension from a garment using different turbulence dispersion models [Volume 9, Issue 2, 2022, Pages 141-154]
  • Khazaee Pool, Amirmohammad Investigation of purge time in cathodic dead-end mode PEMFC [Volume 2, Issue 1, 2015, Pages 13-19]
  • Khoshandam, Behnam A comparison of catalyst behavior of Samaria Modified Ni Catalyst Supported on Mesoporous Silica and Carbon for Methane CO2 Reforming [Volume 8, Issue 1, 2021, Pages 105-113]
  • Kianfar, Amin Mixed Convection Heat Transfer of Water-Alumina Nanofluid in an Inclined and Baffled C-Shaped Enclosure [Volume 5, Issue 2, 2018, Pages 129-138]
  • Konwar, Hemanta Flow, Heat and Mass Transfer past a Stretching Sheet with Temperature Dependent Fluid Properties in Porous Medium [Volume 9, Issue 1, 2022, Pages 17-26]
  • Konwar, Hemanta Effects of Radiation Absorption, Soret and Dufour on Unsteady MHD Mixed Convective Flow past a Vertical Permeable Plate with Slip Condition and Viscous Dissipation [Volume 9, Issue 2, 2022, Pages 155-168]
  • Kushwaha, M. S. A study of a Stefan problem governed with space–time fractional derivatives [Volume 3, Issue 2, 2016, Pages 145-151]

L

  • Lare, Animasaun Isaac Casson Fluid Flow with Variable Viscosity and Thermal Conductivity along Exponentially Stretching Sheet Embedded in a Thermally Stratified Medium with Exponentially Heat Generation [Volume 2, Issue 2, 2015, Pages 63-78]
  • Lare, Animasaun Isaac Effects of Some Thermo-Physical Parameters on Free Convective Heat and Mass Transfer over Vertical Stretching Surface at Absolute Zero [Volume 3, Issue 1, 2016, Pages 31-46]

M

  • Ma, Yuan Natural Convection Heat Transfer of Ag-MgO/Water Micropolar Hybrid Nanofluid inside an F-shaped Cavity Equipped by Hot Obstacle [Volume 8, Issue 2, 2021, Pages 139-150]
  • Macedo, Emanuel Coupled Integral Equations Approach in the Solution of Luikov Equations with Microwave Effect [Volume 7, Issue 1, 2020, Pages 63-75]
  • Macedo, Emanuel Estimation Of Parameters And Selection Of Models Applied To Population Balance Dynamics Via Approximate Bayesian Computational [Volume 9, Issue 1, 2022, Pages 53-64]
  • Macedo, Emanuel Parameter Estimation in Mass Balance Model Applied in Fixed Bed Adsorption Using the Markov Chain Monte Carlo Method [Volume 9, Issue 2, 2022, Pages 219-232]
  • Mahmoodi, Mostafa Buoyancy driven heat transfer of a nanofluid in a differentially heated square cavity under effect of an adiabatic square baffle [Volume 2, Issue 2, 2015, Pages 1-13]
  • Mahmoodzadeh, Milad Numerical Investigation of Roofing Materials Effect on Solar Heat Gain in Different External Conditions [Volume 6, Issue 1, 2019, Pages 41-53]
  • Mahmoudi, Amir Houshang The optimization of inlet and outlet port locations of a vented square cavity [Volume 1, Issue 1, 2014, Pages 35-45]
  • Makinde, O. D. Entropy generation in hydromagnetic and thermal boundary layer flow due to radial stretching sheet with Newtonian heating [Volume 2, Issue 2, 2015, Pages 51-61]
  • Mallah, Mohammad Hasan Determining Effective Parameters on Hydrodynamic Characteristics of Pulsed Packed Column Using ANOVA Method: Determining Optimum Conditions with Maximum Extraction Efficiency [Volume 8, Issue 2, 2021, Pages 267-281]
  • Masoumpour, Mehdi The Numerical analysis of an anode-supported high temperature DIR-PSOFC operating conditions with considering the maximum allowable temperature difference [Volume 2, Issue 2, 2015, Pages 15-25]
  • Meenakshi, V Dufour and Soret Effect on Unsteady MHD Free Convection and Mass Transfer Flow Past an Impulsively Started Vertical Porous Plate Considering with Heat Generation [Volume 8, Issue 2, 2021, Pages 257-266]
  • Mehdizadeh, Alireza Simulation and Comparison of Non-Newtonian Fluid Models Using LBM in a Cavity [Volume 8, Issue 1, 2021, Pages 115-125]
  • Menon, Genesio José Mixed convection study in a ventilated square cavity using nanofluids [Volume 6, Issue 2, 2019, Pages 143-153]
  • Mesgarpour, Mehrdad Numerical investigation of heat transfer in a sintered porous fin in a channel flow with the aim of material determination [Volume 6, Issue 1, 2019, Pages 63-74]
  • Mirjalily, Seyed Ali Agha Numerical simulation of combined transient natural convection and volumetric radiation inside hollow bricks [Volume 8, Issue 2, 2021, Pages 151-162]
  • Miroliaei, Ali Reza Numerical study of flow and heat transfer characteristics of CuO/H2O nanofluid within a mini tube [Volume 6, Issue 1, 2019, Pages 11-20]
  • Mirzaei Ziapour, Behrooz Numerical study of flow and heat transfer characteristics of CuO/H2O nanofluid within a mini tube [Volume 6, Issue 1, 2019, Pages 11-20]
  • Mohammadiun, Mohammad Time Dependent Heat Source Estimation by Conjugate Gradient Method in Multi-Layers System for Hyperthermia of Breast cancer [Volume 7, Issue 2, 2020, Pages 117-129]
  • Moharramkhani, Khatereh Numerical study of fluid flow and heat transfer in a gas-tank water heater [Volume 2, Issue 1, 2015, Pages 21-29]
  • Mohebbi, Komayl Effects of the rectangular groove dimensions on the thermal features of the turbulent Al2O3-water nanofluid flow in the grooved tubes [Volume 2, Issue 1, 2015, Pages 59-70]
  • Mohebbi, Rasul Natural Convection Heat Transfer of Ag-MgO/Water Micropolar Hybrid Nanofluid inside an F-shaped Cavity Equipped by Hot Obstacle [Volume 8, Issue 2, 2021, Pages 139-150]
  • Mohseni, Mahdi Thermal Behavior of Laminar Flow of Supercritical CO2 in a Long Vertical Mini-Pipe under Constant and Stepped Wall Heat Flux [Volume 9, Issue 2, 2022, Pages 245-254]
  • Mohseni Behbahani, Pouyan Experimental Investigation of Condensation Heat Transfer on Vertical Hydrophilic-Hydrophobic Aluminium Surfaces [Volume 9, Issue 1, 2022, Pages 39-52]
  • Mollamahdi, Mahdi Flow field and heat transfer in a channel with a permeable wall filled with Al2O3-Cu/water micropolar hybrid nanofluid, effects of chemical reaction and magnetic field [Volume 3, Issue 2, 2016, Pages 101-114]
  • Moolya, Rekha Magnetohydrodynamics and Aspect Ratio Effects on Double Diffusive Mixed Convection and Their Prediction: Linear Regression Model [Volume 9, Issue 2, 2022, Pages 169-188]
  • Moolya, Shivananda Magnetohydrodynamics and Aspect Ratio Effects on Double Diffusive Mixed Convection and Their Prediction: Linear Regression Model [Volume 9, Issue 2, 2022, Pages 169-188]
  • Moosavi, Rouhollah Experimental evaluation of summer thermal comfort in various types of Sardab (Cellar): underground space in Iran vernacular houses [Volume 8, Issue 1, 2021, Pages 1-11]
  • Moravej, Mojtaba An experimental investigation of performance of a 3-D solar conical collector at different flow rates [Volume 3, Issue 1, 2016, Pages 57-66]
  • Moravej, Mojtaba The effect of SiO2 nanoparticle on the performance of photovoltaic thermal system: Experimental and Theoretical approach [Volume 7, Issue 1, 2020, Pages 11-24]
  • Moravej, Mojtaba Fabrication of solar desalination system and Experimental investigation on the performance of it, located in Ahvaz city [(Articles in Press)]
  • Motaghedi Barforoush, Mohammad Sadegh Non-Fourier heat conduction equation in a sphere; comparison of variational method and inverse Laplace transformation with exact solution [Volume 3, Issue 1, 2016, Pages 47-55]
  • Motamedian, Mahdi Analytical Solution of Non-ideal Gaseous Slip Flow in Circular Sector Micro-channel [Volume 7, Issue 2, 2020, Pages 131-141]
  • Moura, Carlos Henrique Estimation Of Parameters And Selection Of Models Applied To Population Balance Dynamics Via Approximate Bayesian Computational [Volume 9, Issue 1, 2022, Pages 53-64]
  • Mukhopadhyay, Anandamoy Instabilities of Thin Viscous Liquid Film Flowing down a Uniformly Heated Inclined Plane [Volume 3, Issue 2, 2016, Pages 77-87]
  • Mukhopadhyay, Asim Instabilities of Thin Viscous Liquid Film Flowing down a Uniformly Heated Inclined Plane [Volume 3, Issue 2, 2016, Pages 77-87]
  • Mukhopadhyay, Sanghasri Instabilities of Thin Viscous Liquid Film Flowing down a Uniformly Heated Inclined Plane [Volume 3, Issue 2, 2016, Pages 77-87]

N

  • Nadeem, S Three-DimensionalViscousDissipative Flow of Nanofluids Over a Riga Plate [Volume 8, Issue 1, 2021, Pages 49-60]
  • Najati, F. Analytical solution of pressure driven gas flow and heat transfer in micro-Couette using the Burnett equations [Volume 5, Issue 2, 2018, Pages 87-94]
  • Nakagawa, Ai Longitudinal vortex rolls in fluids [Volume 7, Issue 2, 2020, Pages 165-176]
  • Nakagawa, Takeo R.M. Longitudinal vortex rolls in fluids [Volume 7, Issue 2, 2020, Pages 165-176]
  • Narender, G Heat and mass transfer of nanofluid over a linear stretching surface with Viscous dissipation effect [Volume 6, Issue 2, 2019, Pages 117-124]
  • Nasiri, Masoud Determining Effective Parameters on Hydrodynamic Characteristics of Pulsed Packed Column Using ANOVA Method: Determining Optimum Conditions with Maximum Extraction Efficiency [Volume 8, Issue 2, 2021, Pages 267-281]
  • Nasiri Gahraz, Seyedeh Somayeh Transient simulation and life cycle cost analysis of a solar polygeneration system using photovoltaic-thermal collectors and hybrid desalination unit [Volume 8, Issue 2, 2021, Pages 243-256]
  • Nasrollahzadeh, Sohail Heat transfer enhancement in a spiral plate heat exchanger model using continuous rods [Volume 7, Issue 1, 2020, Pages 39-53]
  • Natarajan, E. Unsteady Magnetohydrodynamic Mixed Convection Flow over a Rotating Sphere with Sinusoidal Mass Transfer [Volume 9, Issue 2, 2022, Pages 129-140]
  • Nath, Ganeswar Physico-Acoustic Study on Thermal Conductivity of Silver Nanofluid [Volume 5, Issue 2, 2018, Pages 105-110]
  • Nayak, Binodini Fluid flow and heat transfer characteristics in a curved rectangular duct using Al2O3-water nanofluid [Volume 4, Issue 2, 2017, Pages 103-115]
  • Nazari, Mohsen A Comparative Solution of Natural Convection in an Open Cavity using Different Boundary Conditions via Lattice Boltzmann Method [Volume 3, Issue 2, 2016, Pages 115-129]
  • Nazari, Mohsen Simultaneous Separation/Trapping and Dual Trapping of Microparticles in a Novel Microchip using Dielectrophoresis [Volume 8, Issue 2, 2021, Pages 301-311]
  • Nazari, Morteza A novel electrokinetic micromixing system with conductive mixing-enclosure-A geometrical study [Volume 9, Issue 1, 2022, Pages 65-76]
  • Nazeri, Ashkan Fabrication of solar desalination system and Experimental investigation on the performance of it, located in Ahvaz city [(Articles in Press)]
  • Nemati, Mohammad Analysis of the Effect of Periodic Magnetic Field, Heat Absorption/Generation and Aspect Ratio of the Enclosure on Non-Newtonian Natural Convection [Volume 8, Issue 2, 2021, Pages 187-203]
  • Nobahar, Somayeh Removal of copper ions from aqueous solutions using polypyrrole and its nanocomposites [Volume 1, Issue 2, 2014, Pages 101-106]
  • Noghrehabadi, Aminreza Effect of magnetic field on the boundary layer flow, heat, and mass transfer of nanofluids over a stretching cylinder [Volume 1, Issue 1, 2014, Pages 9-16]
  • Noghrehabadi, Aminreza An experimental investigation of performance of a 3-D solar conical collector at different flow rates [Volume 3, Issue 1, 2016, Pages 57-66]
  • Noghrehabadi, Aminreza A numerical investigation of heat transfer and pressure drop in a novel cylindrical heat sink with helical minichannels [Volume 5, Issue 1, 2018, Pages 11-26]
  • Noghrehabadi, Aminreza The effect of SiO2 nanoparticle on the performance of photovoltaic thermal system: Experimental and Theoretical approach [Volume 7, Issue 1, 2020, Pages 11-24]
  • NoghrehAbadi, Amin Reza An axisymmetric Lattice Boltzmann Method Simulation of Forced Convection Heat Transfer for Water/Aluminum Oxide Nanofluid through a Tube under Constant Heat Flux on Wall [Volume 8, Issue 1, 2021, Pages 71-85]
  • Norouzi, Mahmood An Exact Analytical Solution for Gaseous Flow and Heat Transfer in Microtubes with Constant Wall Temperature [Volume 8, Issue 1, 2021, Pages 13-22]

O

  • Ojeagbase, Princely Ohiolei Effect of Viscous Dissipation on Seady Natural Convection Heat and Mass Transfer in a Vertical Channel with Variable Viscosity and Thermal Conductivity [Volume 7, Issue 2, 2020, Pages 105-116]
  • Ojolo, Sunday Joshua Analysis of heat transfer in the pyrolysis of differently shaped biomass particles subjected to different boundary conditions: integral transform methods [Volume 4, Issue 1, 2017, Pages 21-34]
  • Olubode, Koriko Kolade Effects of Some Thermo-Physical Parameters on Free Convective Heat and Mass Transfer over Vertical Stretching Surface at Absolute Zero [Volume 3, Issue 1, 2016, Pages 31-46]
  • Omidi Kashani, Behzad Effects of Ratio of Dynamic Circulation to Evaporation Rates on Exergy and Cooling Efficiencies an Evaporative Cooler [Volume 9, Issue 2, 2022, Pages 99-110]
  • Omidkhah Nasrin, Mohammad Reza A New Approach for the Heat and Moisture Transfer in Desiccant Wheels Concerning Air Stream Velocity [Volume 9, Issue 2, 2022, Pages 197-208]
  • Omidpanah, Mohammad Numerical simulation of combined transient natural convection and volumetric radiation inside hollow bricks [Volume 8, Issue 2, 2021, Pages 151-162]
  • Osheku, Chalse Attah Analysis of heat transfer in the pyrolysis of differently shaped biomass particles subjected to different boundary conditions: integral transform methods [Volume 4, Issue 1, 2017, Pages 21-34]
  • Ozgoli, Hassan Ali Thermo-Economic Analysis of Applying Cooling System Using Fog on GE-F5 Gas Turbines (Case Study) [Volume 4, Issue 2, 2017, Pages 73-81]

P

  • Pahamli, Younes Application of phase change materials in refrigerator and freezer appliances: A comprehensive review [Volume 8, Issue 1, 2021, Pages 87-104]
  • Pahlavanzadeh, Hassan A New Approach for the Heat and Moisture Transfer in Desiccant Wheels Concerning Air Stream Velocity [Volume 9, Issue 2, 2022, Pages 197-208]
  • Parsajou, Behnaz Numerical Investigation of Convective Heat Transfer from a Horizontal Plate Due to the Oscillation of a Vertically Oriented Blade [Volume 9, Issue 2, 2022, Pages 111-120]
  • Parvar, Mojtaba Experimental study on the thermal conductivity and viscosity of transformer oil -based nanofluid containing ZnO nanoparticles [Volume 7, Issue 1, 2020, Pages 77-84]
  • Parvaz, Farzad Computational fluid dynamics simulation of the flow patterns and performance of conventional and dual-cone gas-particle cyclones [Volume 5, Issue 1, 2018, Pages 27-38]
  • Parvini, Mehdi Removal of copper ions from aqueous solutions using polypyrrole and its nanocomposites [Volume 1, Issue 2, 2014, Pages 101-106]
  • Pirmohammadi, Mohsen Effects of variations in magnetic Reynolds number on magnetic field distribution in electrically conducting fluid under magnetohydrodynamic natural convection [Volume 4, Issue 2, 2017, Pages 149-155]
  • Pirmohammadi, Mohsen Numerical Study of turbulent free convection of liquid metal with constant and variable properties in the presence of magnetic field [Volume 6, Issue 2, 2019, Pages 133-141]
  • Ponnaiah, Saikrishnan Unsteady Magnetohydrodynamic Mixed Convection Flow over a Rotating Sphere with Sinusoidal Mass Transfer [Volume 9, Issue 2, 2022, Pages 129-140]
  • Pop, Ioan Boundary layer flow beneath a uniform free stream permeable continuous moving surface in a nanofluid [Volume 1, Issue 1, 2014, Pages 55-65]
  • Pourrajab, Rashid Effect of magnetic field on the boundary layer flow, heat, and mass transfer of nanofluids over a stretching cylinder [Volume 1, Issue 1, 2014, Pages 9-16]

Q

  • Quaresma, Joao Coupled Integral Equations Approach in the Solution of Luikov Equations with Microwave Effect [Volume 7, Issue 1, 2020, Pages 63-75]

R

  • Rabienataj Darzi, Ahmad Ali Inward melting inside a horizontal multilobed capsule with conductive wall affected by Ag-MgO/water hybrid and MgO/water nanofluids [Volume 8, Issue 2, 2021, Pages 205-223]
  • Radnia, Hamideh Temperature profile of a power-law fluid over a moving wall with arbitrary injection/suction and internal heat generation/absorption [Volume 4, Issue 1, 2017, Pages 53-64]
  • Raei, Behrouz Statistical analysis of nanofluid heat transfer in a heat exchanger using Taguchi method [Volume 8, Issue 1, 2021, Pages 29-38]
  • Rafee, Roohollah Entropy generation calculation for laminar fully developed forced flow and heat transfer of nanofluids inside annuli [Volume 1, Issue 1, 2014, Pages 25-33]
  • Rafee, Roohollah Effects of the rectangular groove dimensions on the thermal features of the turbulent Al2O3-water nanofluid flow in the grooved tubes [Volume 2, Issue 1, 2015, Pages 59-70]
  • Rafee, Roohollah Computational fluid dynamics simulation of the flow patterns and performance of conventional and dual-cone gas-particle cyclones [Volume 5, Issue 1, 2018, Pages 27-38]
  • Rafee, Roohollah Modeling the Transient Absorption of Particulate Drugs in the Human Upper Airways [Volume 7, Issue 2, 2020, Pages 177-191]
  • Ragupathi, Pachiappan Three-DimensionalViscousDissipative Flow of Nanofluids Over a Riga Plate [Volume 8, Issue 1, 2021, Pages 49-60]
  • Rahbar, Nader 2D Numerical Simulation of a Micro Scale Ranque-Hilsch Vortex Tube [Volume 2, Issue 1, 2015, Pages 39-48]
  • Rahbar, Nader Developing a Model for Predicting the Outlet Gas Temperature of Natural Gas Pressure Reduction Stations to reduce Energy loss [Volume 7, Issue 2, 2020, Pages 143-154]
  • Rahimi, Mostafa Experimental study of free convective heat transfer in a direction-sensitive open cavity [Volume 4, Issue 1, 2017, Pages 13-20]
  • Rahimi, Mostafa Numerical Investigation of Convective Heat Transfer from a Horizontal Plate Due to the Oscillation of a Vertically Oriented Blade [Volume 9, Issue 2, 2022, Pages 111-120]
  • Rahimi Ahar, Zohreh Investigation on Turbulent Nanofluid Flow in Helical Tube in Tube Heat Exchangers [Volume 6, Issue 1, 2019, Pages 31-39]
  • Rahmati, AhmadReza Using the Lattice Boltzmann Method for the numerical study of non-fourier conduction with variable thermal conductivity [Volume 5, Issue 1, 2018, Pages 1-9]
  • Rahmati, AhmadReza Analytical solution of pressure driven gas flow and heat transfer in micro-Couette using the Burnett equations [Volume 5, Issue 2, 2018, Pages 87-94]
  • Rahmati, AhmadReza Performance Investigation of Two Two-Stage Trans-Critical Carbon Dioxide Refrigeration Cycles Ejector and Internal Heat Exchanger [Volume 6, Issue 2, 2019, Pages 75-84]
  • Rahmati, AhmadReza Numerical analysis of gas flows in a microchannel using the Cascaded Lattice Boltzmann Method with varying Bosanquet parameter [Volume 7, Issue 1, 2020, Pages 25-38]
  • Rahmati, AhmadReza Analytical Solution of Non-ideal Gaseous Slip Flow in Circular Sector Micro-channel [Volume 7, Issue 2, 2020, Pages 131-141]
  • Rahmati, AhmadReza Simulation and Comparison of Non-Newtonian Fluid Models Using LBM in a Cavity [Volume 8, Issue 1, 2021, Pages 115-125]
  • Rahmati, AhmadReza Analysis of the Effect of Periodic Magnetic Field, Heat Absorption/Generation and Aspect Ratio of the Enclosure on Non-Newtonian Natural Convection [Volume 8, Issue 2, 2021, Pages 187-203]
  • Rahmati, Bahram Effect of opening diffuser and return vent location on air quality, thermal comfort and energy saving in desk displacement ventilation (DDV) system [Volume 5, Issue 2, 2018, Pages 139-148]
  • Rahmati, Bahram Chilled ceiling effects on the Indoor air quality in a room equipped with displacement ventilation system [Volume 8, Issue 2, 2021, Pages 225-241]
  • Raisi, Afrasiab Experimental Investigation of the Alumina/Paraffin Thermal Conductivity Nanofluids with a New Correlated Equation on Effective Thermal Conductivity [Volume 6, Issue 2, 2019, Pages 85-93]
  • Raissi, Hamed The effects of added hydrogen to the premixed of methane and air in a MEMS channel [Volume 7, Issue 1, 2020, Pages 55-62]
  • Raizah, Z. A. S Radiation and Chemical Reaction Effects on Unsteady Coupled Heat and Mass Transfer by Free Convection from a Vertical Plate Embedded in Porous Media [Volume 7, Issue 2, 2020, Pages 95-103]
  • Rajabi zargarabadi, Mehran Heat Transfer under Double Turbulent Pulsating Jets Impinging on a Flat Surface [Volume 4, Issue 1, 2017, Pages 45-52]
  • Rajabi Zargarabadi, Mehran Parametric study of the flow characteristics and heat transfer from circular intermittent jet impinging on a concave surface [Volume 8, Issue 2, 2021, Pages 173-186]
  • Rajabpour, Ali Thermodynamic Properties of Monatomic, Diatomic, and Polyatomic Gaseous Natural Refrigerants: A Molecular Dynamics Simulation [Volume 8, Issue 1, 2021, Pages 61-69]
  • Rajabpour, Ali Effect of fin geometry on the performance of tubular-fin heat exchangers: A computational fluid dynamics study [Volume 8, Issue 2, 2021, Pages 163-171]
  • Rajan, Devi Magnetohydrodynamics and Aspect Ratio Effects on Double Diffusive Mixed Convection and Their Prediction: Linear Regression Model [Volume 9, Issue 2, 2022, Pages 169-188]
  • Rajati, Hajar Investigation on Turbulent Nanofluid Flow in Helical Tube in Tube Heat Exchangers [Volume 6, Issue 1, 2019, Pages 31-39]
  • Rakhsha, Saeed Parametric study of the flow characteristics and heat transfer from circular intermittent jet impinging on a concave surface [Volume 8, Issue 2, 2021, Pages 173-186]
  • Rallabandi, Srinivasa Raju Analytical and numerical investigation of heat and mass transfer effects on magnetohydrodynamic natural convective flow past a vertical porous plate [Volume 4, Issue 2, 2017, Pages 117-133]
  • Ramiar, Abbas Investigation of purge time in cathodic dead-end mode PEMFC [Volume 2, Issue 1, 2015, Pages 13-19]
  • Ramiar, Abbas Development of a phase change model for volume-of-fluid method in OpenFOAM [Volume 3, Issue 2, 2016, Pages 131-143]
  • Ramos, Marcio Dimas Mixed convection study in a ventilated square cavity using nanofluids [Volume 6, Issue 2, 2019, Pages 143-153]
  • Ranjbar, Ali Akbar Development of a phase change model for volume-of-fluid method in OpenFOAM [Volume 3, Issue 2, 2016, Pages 131-143]
  • Ranjbar, Seyed Faramarz The effect of Geometrical parameters on heat transfer coefficient in helical double tube exchangers [Volume 1, Issue 2, 2014, Pages 75-82]
  • Rashidi, Saman A novel electrokinetic micromixing system with conductive mixing-enclosure-A geometrical study [Volume 9, Issue 1, 2022, Pages 65-76]
  • Rastegar, Saeed Developing a Model for Predicting the Outlet Gas Temperature of Natural Gas Pressure Reduction Stations to reduce Energy loss [Volume 7, Issue 2, 2020, Pages 143-154]
  • Rezaei, Aso Hydro-thermal performance evaluation of nanofluids flow in double pipe heat exchanger: Effects of inner pipe cross section, circular or cam-shaped [Volume 8, Issue 2, 2021, Pages 283-299]
  • Rezvani, Abdollah Numerical Study of Entropy Generation for Natural Convection in Cylindrical Cavities [Volume 3, Issue 2, 2016, Pages 89-99]
  • Rodrigues, Emerson Cardoso Parameter Estimation in Mass Balance Model Applied in Fixed Bed Adsorption Using the Markov Chain Monte Carlo Method [Volume 9, Issue 2, 2022, Pages 219-232]
  • Rodrigues Moura, Carlos Henrique Parameter Estimation in Mass Balance Model Applied in Fixed Bed Adsorption Using the Markov Chain Monte Carlo Method [Volume 9, Issue 2, 2022, Pages 219-232]
  • Rostamian, Seyed hadi Experimental study on the thermal conductivity and viscosity of transformer oil -based nanofluid containing ZnO nanoparticles [Volume 7, Issue 1, 2020, Pages 77-84]

S

  • S, suresh Heat Transfer Studies of Supercritical Water Flows in an Upward Vertical Tube [Volume 6, Issue 2, 2019, Pages 155-167]
  • Sadatsakkak, Seyedabbas Effect of fin geometry on the performance of tubular-fin heat exchangers: A computational fluid dynamics study [Volume 8, Issue 2, 2021, Pages 163-171]
  • Saedodin, Seyfolah An experimental investigation of rheological characteristics of non- Newtonian nanofluids [Volume 1, Issue 1, 2014, Pages 17-23]
  • Saedodin, Seyfolah Experimental investigation and proposed correlations for temperaturedependent thermal conductivity enhancement of ethylene glycol based nanofluid containing ZnO nanoparticles [Volume 1, Issue 1, 2014, Pages 47-54]
  • Saedodin, Seyfolah Numerical study of a combined convection flow in a cavity filled with nanofluid considering effects of diameter of nanoparticles and cavity inclination angles [Volume 5, Issue 1, 2018, Pages 39-49]
  • Saedodin, Syfolah Non-Fourier heat conduction equation in a sphere; comparison of variational method and inverse Laplace transformation with exact solution [Volume 3, Issue 1, 2016, Pages 47-55]
  • Saedodin, Syfolah Experimental study on the thermal conductivity and viscosity of transformer oil -based nanofluid containing ZnO nanoparticles [Volume 7, Issue 1, 2020, Pages 77-84]
  • Saedodin, Syfolah Parametric study of the flow characteristics and heat transfer from circular intermittent jet impinging on a concave surface [Volume 8, Issue 2, 2021, Pages 173-186]
  • Safdari, Jaber Determining Effective Parameters on Hydrodynamic Characteristics of Pulsed Packed Column Using ANOVA Method: Determining Optimum Conditions with Maximum Extraction Efficiency [Volume 8, Issue 2, 2021, Pages 267-281]
  • Saffarian, Mohamadreza Energy and Exergy Analysis of a Diesel Engine Running with Biodiesel Fuel [Volume 5, Issue 2, 2018, Pages 95-104]
  • Samsoloman, D.P. Investigation of shell and tube heat exchangers by using a design of experiment [Volume 1, Issue 2, 2014, Pages 59-66]
  • Sanaie-Moghadam, Maryam Determination of stationary region boundary in multiple reference frames method in a mixing system agitated by Helical Ribbon Impeller using CFD [Volume 2, Issue 1, 2015, Pages 31-37]
  • Santana Dias, Camila Parameter Estimation in Mass Balance Model Applied in Fixed Bed Adsorption Using the Markov Chain Monte Carlo Method [Volume 9, Issue 2, 2022, Pages 219-232]
  • Santhosh Kumar, Deenadayalan Heat Transfer Studies of Supercritical Water Flows in an Upward Vertical Tube [Volume 6, Issue 2, 2019, Pages 155-167]
  • Sarojamma, G Unsteady boundary layer flow of a Casson fluid past a wedge with wall slip velocity [Volume 4, Issue 2, 2017, Pages 91-102]
  • Sarreshtedari, Ali Investigation of the thermo-hydraulic behavior of the fluid flow over a square ribbed channel [Volume 1, Issue 2, 2014, Pages 101-106]
  • Satheesh, Anbalagan Magnetohydrodynamics and Aspect Ratio Effects on Double Diffusive Mixed Convection and Their Prediction: Linear Regression Model [Volume 9, Issue 2, 2022, Pages 169-188]
  • Seddighi, Sarkhosh Boundary layer flow beneath a uniform free stream permeable continuous moving surface in a nanofluid [Volume 1, Issue 1, 2014, Pages 55-65]
  • Sedeh Ghahfarokhi, Mohammad Energy and Exergy Analysis of a Diesel Engine Running with Biodiesel Fuel [Volume 5, Issue 2, 2018, Pages 95-104]
  • Sefid, Mohammad 3D Simulation of the Effects of the Plasma Actuator on the Unsteady, Turbulent and Developing Flow within a Circular Duct [Volume 6, Issue 2, 2019, Pages 95-103]
  • Sefid, Mohammad Analysis of the Effect of Periodic Magnetic Field, Heat Absorption/Generation and Aspect Ratio of the Enclosure on Non-Newtonian Natural Convection [Volume 8, Issue 2, 2021, Pages 187-203]
  • Seyyedvalilu, Mir Hatef The effect of Geometrical parameters on heat transfer coefficient in helical double tube exchangers [Volume 1, Issue 2, 2014, Pages 75-82]
  • Shafaghat, Rouzbeh Investigation of purge time in cathodic dead-end mode PEMFC [Volume 2, Issue 1, 2015, Pages 13-19]
  • Shafahi, Maryam Analysis of Gasketed-plate Heat Exchanger Performance Using Nanofluid [Volume 4, Issue 1, 2017, Pages 65-72]
  • Shahmardan, Mohammad Mohsen Time Dependent Heat Source Estimation by Conjugate Gradient Method in Multi-Layers System for Hyperthermia of Breast cancer [Volume 7, Issue 2, 2020, Pages 117-129]
  • Shahrooi, shahram Investigating Tubes Material Selection on Thermal Stress in Shell Side Inlet Zone of a Vertical Shell and Tube Heat Exchanger [Volume 6, Issue 1, 2019, Pages 21-30]
  • Shariatmadar tehrani, Mansoureh Time Dependent Heat Source Estimation by Conjugate Gradient Method in Multi-Layers System for Hyperthermia of Breast cancer [Volume 7, Issue 2, 2020, Pages 117-129]
  • Shateri, Mostafa 2D Numerical Simulation of a Micro Scale Ranque-Hilsch Vortex Tube [Volume 2, Issue 1, 2015, Pages 39-48]
  • Sheikhzadeh, GhanbarAli Simulation and Comparison of Non-Newtonian Fluid Models Using LBM in a Cavity [Volume 8, Issue 1, 2021, Pages 115-125]
  • Sheikhzadeh, GhanbarAli Experimental Investigation of Condensation Heat Transfer on Vertical Hydrophilic-Hydrophobic Aluminium Surfaces [Volume 9, Issue 1, 2022, Pages 39-52]
  • Sheikhzadeh, Ghanbar Ali Flow field and heat transfer in a channel with a permeable wall filled with Al2O3-Cu/water micropolar hybrid nanofluid, effects of chemical reaction and magnetic field [Volume 3, Issue 2, 2016, Pages 101-114]
  • Shekari, Younes Numerical simulation of transient natural gas flow in pipelines using high order DG-ADER scheme [Volume 4, Issue 1, 2017, Pages 35-43]
  • Shirzadi Ahoudashti, Masoud Intensification of CO₂ Capture by Monoethanolamine Solution in a Rotating Packed Bed Reactor Equipped with High Frequency Ultrasonic Transducers [Volume 9, Issue 2, 2022, Pages 121-128]
  • Shoeibi, Shahin Numerical simulation of combined transient natural convection and volumetric radiation inside hollow bricks [Volume 8, Issue 2, 2021, Pages 151-162]
  • Shoheib, Mohammad Mehdi Investigating Tubes Material Selection on Thermal Stress in Shell Side Inlet Zone of a Vertical Shell and Tube Heat Exchanger [Volume 6, Issue 1, 2019, Pages 21-30]
  • Shojaeefard, Mohammad Hassan Inward melting inside a horizontal multilobed capsule with conductive wall affected by Ag-MgO/water hybrid and MgO/water nanofluids [Volume 8, Issue 2, 2021, Pages 205-223]
  • Shomali, M. Numerical analysis of gas flows in a microchannel using the Cascaded Lattice Boltzmann Method with varying Bosanquet parameter [Volume 7, Issue 1, 2020, Pages 25-38]
  • Shukla, Vidya Prasad Visvanath Analytical Solutions for Spatially Variable Transport-Dispersion of Non-Conservative Pollutants [Volume 6, Issue 2, 2019, Pages 125-132]
  • Singh, Abhishek Kumar A study of a Stefan problem governed with space–time fractional derivatives [Volume 3, Issue 2, 2016, Pages 145-151]
  • Sobamowo, Gbeminiyi M Analysis of heat transfer in the pyrolysis of differently shaped biomass particles subjected to different boundary conditions: integral transform methods [Volume 4, Issue 1, 2017, Pages 21-34]
  • Solaimany Nazar, Ali Reza Temperature profile of a power-law fluid over a moving wall with arbitrary injection/suction and internal heat generation/absorption [Volume 4, Issue 1, 2017, Pages 53-64]
  • Solaimany Nazar, Ali Reza Investigation on Turbulent Nanofluid Flow in Helical Tube in Tube Heat Exchangers [Volume 6, Issue 1, 2019, Pages 31-39]
  • Soni, Anupam Bala Separation of methacrylic acid from aqueous phase using quaternary amine [Volume 3, Issue 1, 2016, Pages 1-7]
  • Souza, Marcelo Coupled Integral Equations Approach in the Solution of Luikov Equations with Microwave Effect [Volume 7, Issue 1, 2020, Pages 63-75]
  • Sreedhar Sarma, G Heat and mass transfer of nanofluid over a linear stretching surface with Viscous dissipation effect [Volume 6, Issue 2, 2019, Pages 117-124]
  • Sreelakshmi, K Unsteady boundary layer flow of a Casson fluid past a wedge with wall slip velocity [Volume 4, Issue 2, 2017, Pages 91-102]
  • Sundaravel, Anand Heat Transfer Studies of Supercritical Water Flows in an Upward Vertical Tube [Volume 6, Issue 2, 2019, Pages 155-167]
  • Swarnkar, Akanksha Separation of methacrylic acid from aqueous phase using quaternary amine [Volume 3, Issue 1, 2016, Pages 1-7]

T

  • Tabe, Reza Modeling the Transient Absorption of Particulate Drugs in the Human Upper Airways [Volume 7, Issue 2, 2020, Pages 177-191]
  • Taherian, Mohsen 2D Numerical Simulation of a Micro Scale Ranque-Hilsch Vortex Tube [Volume 2, Issue 1, 2015, Pages 39-48]
  • Taherian, Zahra - A comparison of catalyst behavior of Samaria Modified Ni Catalyst Supported on Mesoporous Silica and Carbon for Methane CO2 Reforming [Volume 8, Issue 1, 2021, Pages 105-113]
  • Taheri Ghahfarokhi, Zahra Three-dimensional numerical simulation of temperature and flow fields in a Czochralski growth of germanium [Volume 5, Issue 1, 2018, Pages 69-77]
  • Tajally, Mohammad - A comparison of catalyst behavior of Samaria Modified Ni Catalyst Supported on Mesoporous Silica and Carbon for Methane CO2 Reforming [Volume 8, Issue 1, 2021, Pages 105-113]
  • Tajik Jamal-Abad, Milad An experimental investigation of rheological characteristics of non- Newtonian nanofluids [Volume 1, Issue 1, 2014, Pages 17-23]
  • Talebi, Farhad The optimization of inlet and outlet port locations of a vented square cavity [Volume 1, Issue 1, 2014, Pages 35-45]
  • Talebi, Farhad Investigation of pore-scale random porous media using lattice boltzmann method [Volume 2, Issue 1, 2015, Pages 1-12]
  • Talebi, Farhad Effects of the rectangular groove dimensions on the thermal features of the turbulent Al2O3-water nanofluid flow in the grooved tubes [Volume 2, Issue 1, 2015, Pages 59-70]
  • Tarighi, Reza Heat Transfer under Double Turbulent Pulsating Jets Impinging on a Flat Surface [Volume 4, Issue 1, 2017, Pages 45-52]
  • Tavakoli, M.H. Three-dimensional numerical simulation of temperature and flow fields in a Czochralski growth of germanium [Volume 5, Issue 1, 2018, Pages 69-77]
  • Tavakoli, Mohammad Hossein Numerical study of fluid flow and heat transfer in a gas-tank water heater [Volume 2, Issue 1, 2015, Pages 21-29]
  • Tavares, Maria Estimation Of Parameters And Selection Of Models Applied To Population Balance Dynamics Via Approximate Bayesian Computational [Volume 9, Issue 1, 2022, Pages 53-64]
  • Tavares, Rhaisa Parameter Estimation in Mass Balance Model Applied in Fixed Bed Adsorption Using the Markov Chain Monte Carlo Method [Volume 9, Issue 2, 2022, Pages 219-232]
  • Tayebi, Ali Numerical simulation of transient natural gas flow in pipelines using high order DG-ADER scheme [Volume 4, Issue 1, 2017, Pages 35-43]
  • Thapa, Robin Kumar Computational Analysis of Automobile Radiator Roughened with Rib Roughness [Volume 9, Issue 2, 2022, Pages 209-218]
  • Tunde, Mohammed Muritala Fluid Analysis of Double-Layered Blood Flow through a Tapered Overlapping Stenosed Artery with a Porous Wall [Volume 9, Issue 2, 2022, Pages 189-196]

U

  • Uosofvand, Hamed Effect of baffle oientation on shell tube heat exchanger performance [Volume 4, Issue 2, 2017, Pages 83-90]
  • Usefian, Azam Rapid mixing of Newtonian and non-Newtonian fluids in a three-dimensional micro-mixer using non-uniform magnetic field [Volume 6, Issue 1, 2019, Pages 55-61]

V

  • Vahedi, Seyed Masoud Computational fluid dynamics simulation of the flow patterns and performance of conventional and dual-cone gas-particle cyclones [Volume 5, Issue 1, 2018, Pages 27-38]
  • Vajdi, Mohammad Numerical Investigation of Convective Heat Transfer from a Horizontal Plate Due to the Oscillation of a Vertically Oriented Blade [Volume 9, Issue 2, 2022, Pages 111-120]
  • Vakilinezhhad, Roza Experimental evaluation of summer thermal comfort in various types of Sardab (Cellar): underground space in Iran vernacular houses [Volume 8, Issue 1, 2021, Pages 1-11]
  • Valipour, Mohammad Sadegh An experimental investigation of rheological characteristics of non- Newtonian nanofluids [Volume 1, Issue 1, 2014, Pages 17-23]
  • Valipour, Mohammad Sadegh Numerical modelling of double-diffusive natural convection within an arc shaped enclosure filled with a porous medium [Volume 1, Issue 2, 2014, Pages 83-91]
  • Valipour, Mohammad Sadegh 2D Numerical Simulation of a Micro Scale Ranque-Hilsch Vortex Tube [Volume 2, Issue 1, 2015, Pages 39-48]
  • Valipour, Mohammad Sadegh Numerical Study of Entropy Generation for Natural Convection in Cylindrical Cavities [Volume 3, Issue 2, 2016, Pages 89-99]
  • Valipour, Mohammad Sadegh Thermal-Economic Optimization of Shell and Tube Heat Exchanger by using a new Multi-Objective optimization method [Volume 3, Issue 1, 2016, Pages 67-76]
  • Valipour, Mohammad Sadegh Modeling the Transient Absorption of Particulate Drugs in the Human Upper Airways [Volume 7, Issue 2, 2020, Pages 177-191]
  • Valipour, Mohammad Sadegh Application of phase change materials in refrigerator and freezer appliances: A comprehensive review [Volume 8, Issue 1, 2021, Pages 87-104]
  • Valipour, Mohammad Sadegh Converging Flow Passages, Nanofluids and Magnetic Field: Effects on the Thermal Response of Microchannel Heat Sinks [Volume 9, Issue 1, 2022, Pages 77-84]
  • Valipour, Mohmmad Sadegh Investigation of pore-scale random porous media using lattice boltzmann method [Volume 2, Issue 1, 2015, Pages 1-12]
  • Varaminian, Farshad Processes and apparatuses for formation, separation, pelletizing storage and re-gasification of gas hydrate [Volume 2, Issue 2, 2015, Pages 27-35]
  • Varzandeh, Mahsa Natural Convection Heat Transfer of Ag-MgO/Water Micropolar Hybrid Nanofluid inside an F-shaped Cavity Equipped by Hot Obstacle [Volume 8, Issue 2, 2021, Pages 139-150]
  • Vasundhara, B Unsteady boundary layer flow of a Casson fluid past a wedge with wall slip velocity [Volume 4, Issue 2, 2017, Pages 91-102]
  • Vaziri, Seyyed Amirreza An Exact Analytical Solution for Gaseous Flow and Heat Transfer in Microtubes with Constant Wall Temperature [Volume 8, Issue 1, 2021, Pages 13-22]
  • Viegas, Bruno Coupled Integral Equations Approach in the Solution of Luikov Equations with Microwave Effect [Volume 7, Issue 1, 2020, Pages 63-75]
  • Viegas, Bruno Marques Estimation Of Parameters And Selection Of Models Applied To Population Balance Dynamics Via Approximate Bayesian Computational [Volume 9, Issue 1, 2022, Pages 53-64]
  • Viegas, Bruno Parameter Estimation in Mass Balance Model Applied in Fixed Bed Adsorption Using the Markov Chain Monte Carlo Method [Volume 9, Issue 2, 2022, Pages 219-232]

Y

  • YadollhiFarsani, Rouhollah Experimental Investigation of the Alumina/Paraffin Thermal Conductivity Nanofluids with a New Correlated Equation on Effective Thermal Conductivity [Volume 6, Issue 2, 2019, Pages 85-93]
  • Yazdani, Hamidreza 3D Simulation of the Effects of the Plasma Actuator on the Unsteady, Turbulent and Developing Flow within a Circular Duct [Volume 6, Issue 2, 2019, Pages 95-103]
  • Yousefpor, Mardali A comparison of catalyst behavior of Samaria Modified Ni Catalyst Supported on Mesoporous Silica and Carbon for Methane CO2 Reforming [Volume 8, Issue 1, 2021, Pages 105-113]
  • Yousefpor, Mardali The synthesis of Lanthanum oxide-/Ni catalyst on the CMK-3 for the CO2 reforming of CH4 [(Articles in Press)]
  • Yusuf, Tunde Thermodynamic analysis of a magnetohydrodyamic oldroyd 8-constant fluid in a vertical channel with heat source and slippage [Volume 4, Issue 2, 2017, Pages 135-148]
  • Yusuff Ansari, S. Mohamed Analytical and Numerical Studies on Hydromagnetic Flow of Boungiorno Model Nanofluid over a Vertical Plate [Volume 3, Issue 2, 2016, Pages 153-164]

Z

  • Zamani Aghaee, Alireza Investigation of the thermo-hydraulic behavior of the fluid flow over a square ribbed channel [Volume 1, Issue 2, 2014, Pages 101-106]
  • Zamzamian, Amirhossein An experimental investigation of rheological characteristics of non- Newtonian nanofluids [Volume 1, Issue 1, 2014, Pages 17-23]
  • Zamzamian, Amirhossein Analysis of variance of nanofluid heat transfer data for forced convection in horizontal spirally coiled tubes [Volume 2, Issue 2, 2015, Pages 45-50]
  • Zamzamian, SEYED AMIR HOSSEIN A New Approach for the Heat and Moisture Transfer in Desiccant Wheels Concerning Air Stream Velocity [Volume 9, Issue 2, 2022, Pages 197-208]
  • Zarabadi, S. Alireza Effect of fin geometry on the performance of tubular-fin heat exchangers: A computational fluid dynamics study [Volume 8, Issue 2, 2021, Pages 163-171]
  • Zare Ghadi, Ariyan Numerical modelling of double-diffusive natural convection within an arc shaped enclosure filled with a porous medium [Volume 1, Issue 2, 2014, Pages 83-91]
  • Zare Vamerzani, Behrooz An Exact Analytical Solution for Gaseous Flow and Heat Transfer in Microtubes with Constant Wall Temperature [Volume 8, Issue 1, 2021, Pages 13-22]